Strenx

Strenx-top-image-closeup-supplier-mumbai-india
Strenx-high-strength-steel-supplier-mumbai-india
Strenx-new-brand-supplier-mumbai-india

Our Product Range

Strenx® 1300

The ultra-high-strength steel at 1300 MPa

Strenx® 1300 is an ultra-high-strength structural steel with a minimum yield strength of 1300 MPa.

Typical applications include load-carrying structures that place very high demands on low weight. SSAB developed Strenx® 1300 for building the lightest possible steel solutions or providing an alternative to other materials. 

Strenx® 1300 benefits include:

  • Good weldability with excellent HAZ strength and toughness
  • Exceptional consistency within a plate guaranteed by close tolerances
  • High impact toughness which provides for good resistance to fractures
  • Superior bendability and surface quality
Strenx-1300-supplier-mumbai-india

Strenx® 1100

The high-strength structural steel at 1100 MPa

Strenx® 1100 is a structural steel with a high yield strength at a minimum of 1100 MPa. Typical applications include demanding load-bearing structures.

Despite its strength, the material is surprisingly easy to weld and bend. Strenx® 1100 benefits include:

  • Good weldability with excellent HAZ strength and toughness
  • Exceptional consistency within a plate guaranteed by close tolerances
  • High impact toughness which provides for good resistance to fractures
  • Superior bendability and surface quality

Strenx® 1100 Product Range

  • Strenx 1100 Plus
  • Strenx 1100MC
  • Strenx 1100 CR
Strenx-1100-supplier-mumbai-india

Strenx® 960 E/F

The high-strength structural steel at 960 MPa

Strenx® 960 E/F is a structural steel that guarantees a minimum yield strength of up to 960 MPa depending on thickness.

Strenx® 960 E meets the requirements of EN 10 025-6 for the S960QL grade and thicknesses. Strenx® 960 F exceeds EN 10 025-6, since there is no grade for S960 impact tested at -60ºC in the standard. Typical applications include demanding load-bearing structures. 

Strenx® 960 E/F benefits include:

  • Exceptional consistency within a plate guaranteed by close tolerances
  • High impact toughness which provides for good resistance to fractures
  • Superior bendability and surface quality
  • Weldability with excellent HAZ strength and toughness
Strenx-960-supplier-mumbai-india

Strenx® 960 Product Range

  • Strenx 960 E
  • Strenx 960MC
  • Strenx 960 Plus
  • Strenx 960 CR

Strenx® 900

Strenx® 900 is a structural steel that guarantees a minimum yield strength of up to 900 MPa depending on thickness.

Strenx® 900 provides a unique combination of strength and toughness together with first-rate workshop properties. Typical applications include load-bearing structures, where low weight is needed.

Strenx® 900 meets the requirements of EN 10 025-6 for the S890 grade and thicknesses. Strenx® 900 E (complies with S890QL) is available in plate thicknesses of 4–100 mm, while Strenx® 900 F (complies with S890QL1) is available in the thickness range up to 80 mm. 

Benefits include:

  • High impact toughness which provides for good resistance to fractures
  • Superior bendability and surface quality
  • Weldability with excellent HAZ strength and toughness
  • Exceptional consistency within a plate guaranteed by close tolerances

Strenx® 900 Product Range

  • Strenx 900 E/F
  • Strenx 900MC
  • Strenx 900 Plus
Strenx-900-supplier-mumbai-india

Strenx® 700

The high-strength structural steel at 700 MPa

In the never-ending battle for improved performance of steel products, less weight wins. Strenx® is stronger than ordinary steel, you need less material to achieve equivalent strengths in your products.

Strenx® 700 products are structural steel with a minimum yield strength of 650-700 MPa depending on thickness.

The chemical analysis, consisting of low levels of carbon has additional grain refiners such as niobium, titanium or vanadium that are precisely added to the chemistry. This together with high cleanliness, makes Strenx® performance steels the most competitive alternative for cold formed and welded products.

Strenx® 700 products are used in applications such as tipper and trailer chassis, cranes, construction and agriculture equipment, especially in load carrying structures that have high demands for lower weight. In these applications, the high strength of these steels can be used to save weight, increase the payload or increase the performance. Furthermore, as a result of these benefits and the good formability of the steels, the total cost can be reduced.

Strenx-700-supplier-mumbai-india

Strenx® 700 Product Range

  • Strenx 700 Product Group
  • Strenx 700 E/F
  • Strenx 700MC D/E
  • Strenx 700MC Plus
  • Strenx 700 CR
  • Strenx 700 OME

Strenx® 650MC

The high-strength structural steel at 650 MPa

Strenx® 650MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 650 MPa for stronger and lighter structures.

Strenx® 650MC meets or exceeds the requirements of S650MC in EN 10149-2.

Typical applications include a wide range of components and parts, such as demanding load-bearing structures. Strenx® 650MC comes in coils, slit coils or cut-to-length sheets.

Strenx® 650 Product Range

  • Strenx 650MC D/E
Strenx-650MC-supplier-mumbai-india

Strenx® 600MC

The high-strength structural steel at 600 MPa

Strenx® 600MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 600 MPa for stronger and lighter structures.

Strenx® 600MC meets or exceeds the requirements of S600MC in EN 10149-2.

Typical applications include a wide range of components and parts, such as demanding load-bearing structures. Strenx® 600MC comes in coils, slit coils or cut-to-length sheets.

Strenx® 600 Product Range

  • Strenx 600MC D/E
Strenx-600MC-supplier-mumbai-india

Strenx® 110 XF

The thermomechanically rolled steel for cold forming

Strenx® 110 XF is a thermomechanically rolled steel at 110 ksi made for cold forming and used for light and heavy transportation components and solutions.  It comes in coils, slit coils and cut-to-length sheets.

Thickness measurements in inches can be found in the data sheet. 

Strenx 100-110 Product Range

  • Strenx 110 XF
  • Strenx 100
  • Strenx 100 XF
Strenx-110-supplier-mumbai-india

Strenx® Tube 700MH

Advanced high-strength structural hollow sections

Strenx® Tube 700MH is an HF-welded cold-formed structural hollow section made of hot-rolled high-strength steel with a minimum yield strength of 700 MPa.

Its high strength combined with naturally stiff form of welded hollow section enables construction of stronger and lighter structures. Strenx® Tube 700MH meets or exceeds the requirements of prEN 10219 (2016) and it is CE marked according to EN 1090-2. Typical applications include load-bearing structures in the lifting, handling and transportation segments.

Strenx® Tube 700MH is available in circular, square and rectangular shapes. Other shapes and sizes are available upon request.

The maximum length of the tubes is 12-18 meters, depending on the size. Longer or cut-to-length tubes are available upon request.

Hot dip galvanizing Strenx® Tube 700MH hollow sections may lead to cracking. Please consult SSAB Tech Support prior galvanization.

Strenx-Tube-700-supplier-mumbai-india

Strenx Tube Product Range

  • Strenx Tube 700MH
  • Strenx Tube 700MLH
  • Strenx Tube 700QLH
  • Strenx Tube 900MH
  • Strenx Tube 960MH

Strenx Sections

Advanced high-strength, cold-formed steel section

Strenx® Section is a cold-formed steel section made of hot-rolled, high-strength steel

Its high-strength combined with naturally stiff form enables construction of stronger and lighter structures. Typical applications include demanding load-bearing structures in the lifting, handling and transportation segments.

Strenx® Sections are available in steel grades Strenx® 650MC, Strenx® 700MC and Strenx® 900MC, which meet or exceed the requirements of EN 10149-2.

Tolerances of the Strenx® Sections meet or exceed, when applicable, the requirements of EN 10162.

Strenx® Sections are available as U-sections. Other shapes and variations are available upon request. The maximum length of the sections is 21 meters, cut-to-length sections are available upon request.

Strenx-Sections-supplier-mumbai-india

Feel free to get in touch!

×

Get In Touch

Contact Info

Address info

59/61, Farida House, Ground Floor,
2nd Panjrapole lane C.P. Tank Road
Mumbai - 400 004 India